Capacitive Point Level Detection

Compact point level switch for detection with active build-up compensation; No calibration necessary; Version available for dust explosion areas

：         徐

Your Benefits

• Complete unit consisting of the probe and electronic insert:
  - simple mounting
  - no calibration on start-up
• Active build-up compensation
  - accurate switch point even with heavy build-up on the probe
  - high operational safety
• Mechanically rugged
  - no wearing parts
  - long operating life
  - no maintenance

Minicap is designed for point level detection of light bulk solids, with a grain size up to max. 30 mm and a dielectric constant εr ≥ 1.6, e.g. grain products, flour, milk powder, animal feed, cement, chalk or gypsum.

Versions:

• Minicap FTC260: with 140 mm rod probe, with FDA listed material; for bulk solids and liquids
• Relay output （potential-free change-over contact /SPDT） with AC or DC power
• PNP output with three-wire DC power

：         徐
Endress+Hauser works to a defined standard production time （from order entry to goods issue） depending on the variant of the Minicap FTC260.
Production times can be confirmed via your contact person or via the online shop.

Distribution:
Endress+Hauser will ship your order direct to your delivery address. In certain cases express or emergency shipments can be made on request.

Track & Trace:
Check your order status online using your reference number or the Endress+Hauser order confirmation number.
Spare Parts Logistics:  恩德斯豪斯E+H 一體化minicap FTC260限位開關
Spare parts are handled as standard products with a short standard delivery time. On request we deliver on shortest possible delivery time （extra charge）.

	產品型號：	FTC260/262
	產品名稱：	電容物位計
	量程: 500...6.000 mm / 19.7...236 種類: 一體式 溫度范圍: -40...80 °C / -40...176 °F 耐壓: -1...6 bar / ...87psi 顆粒尺寸: up to 30 mm